- Reg Number: N34SA
- 3,850 Hour
- Year Built: 1978
- Fuel Type: Gas
Finding the right airframe is the most exciting, yet hardest part! We do the legwork, so you can sit back and enjoy the results. We don’t go out and buy the first plane we see. We conduct a thorough inspection, to see if it’s worthy of our time and your money. Our pre-buy includes an FAA search of all the records pertaining to the aircraft. We ensure there are no outstanding liens, no major repair 337’s and we track the chain of ownership to ensure the plane has always been based in the United States. Next, we inspect the log books to confirm that they’re original and complete since the day it was built. We then inspect the actual airframe. We look for corrosion. We inspect the skins for any hail damage. Then, the remainder of the airframe is inspected as if were an annual. If any AD’s are outstanding, or anything is found to be un-airworthy or marginal on its wear life, we will fix it or replace it. To ensure the highest quality, we ask that you the buyer have the plane inspected by a third party. If anything is found un-airworthy, or any equipment not working to manufacturer’s specifications– down to the last light bulb– we will fix it. No questions asked, at no charge to you.
*Customer satisfaction is something we take seriously. Our goal is to deliver a quality aircraft and to build a solid relationship with you. We are at your disposal, at any time, to answer your questions. Visit our testimonial page to see our customer endorsements.
Model: M20J 201
Total Time: Only 3850 Hours Since New
Engine: “0”Since Major Overhaul to Factory NEW Limits with Factory NEW Cylinders,Overhauled Mags, New Mag Harness,Overhauled Fuel System,New Engine Mounts,Overhauled Baffling,All New Engine Hoses, Overhauled Vac Pump, Overhauled Exhaust System, Overhauled Engine Mount and Engine Has a Full 2 Year or 500 hour 100% Warranty. Warranty Starts at Time of Delivery.
Prop: “0” Since Prop and Governor Overhaul (2-Blade)
Annual: Due October 2011
IFR: Due July 2011
Exterior: We removed all necessary control surfaces, the inspection panels, the wing, elevator and rudder tips, and wheel pants. All the exterior plastic or fiberglass was inspected. We replaced anything we could not restore to like new condition. Next, we stripped off the old paint down to the bare aluminum, including the door frames. Then we cleaned, prepped, and primed all surfaces. The final paint coat was applied in a dust-free environment, where we used the Sherwin Williams Jet-Glo process. The control surfaces were re-balanced and installed with new hardware. All other external hardware was replaced with stainless steel. All exterior rubber seals were replaced. New tinted glass was installed and the windows were sealed to prevent leakage.. This new classy paint job is in Matterhorn White with Seminole Red, and Las Vegas Gold stripes. We added a beautiful finishing touch with the numbers shaded in Las Vegas Gold. The paint job includes a one-year warranty as soon as you’ve taken delivery of your aircraft
Interior: We removed the complete interior and examined it for corrosion. We cleaned and treated any that was found. We inspected all interior plastic, and made any repairs or replaced it with new materials. The window trim was dyed to match the interior of the aircraft. The headliner was cleaned and re-dyed or replaced– whatever it took to make it look like new. The seatbelts were re-webbed and color coordinated to match the interior. We installed a new interior placard kit, and new carpeting throughout. We fashioned new side panels with new hardware to fit and look like they did from the factory. We padded and covered the armrests in a matching material. We performed a mechanical and structural inspection of the seat frames, and repaired them as necessary. Also, we painted the seat frames to match the interior. We re-worked the foam and the seat webbing so they’re conducive to lumbar and thigh support. If you prefer, we can custom-cut the foam to fit your body shape before you take delivery. We covered the seats in a high-grade leather and vinyl combination and used a double-French seam– the same process used in high-end vehicles. We installed new windlace cord on doors, along with all new door seals. We find that makes for a quite cabin. The “in” color for 2010 is a rich, two-tone tan, which we outfitted in this aircraft. It’s a perfect compliment to the side panels and the cut-pile carpeting in beige.
The interior includes a one-year warranty against manufacturer’s defects, which starts when you take delivery of your aircraft.
Avionics: We removed all outdated avionics and excess wiring. Every flight and engine instrument was inspected for cosmetic and mechanical performance. If any instrument lenses were foggy, discolored, or not working properly, they were repaired. The autopilot is tested to perform to manufacturer’s specifications. If it didn’t meet these standards, it was fixed. All light bulbs were inspected and replaced if not working. We refurbish the instrument panel overlay in black to give you a clean, modern-looking panel. A FAA certified repair station installed the following modern avionics stack. All new avionic installations include the manufacturer warranty.
Apollo SL15 Audio Panel with 4 Place Intercom and Music Input
Garmin CNX80 WAAS (480W) IFR GPS NAV COM
King KCS 55a Slaved HSI
Garmin SL 30 NAV COM
Garmin SL70 Transponder displayed on (CNX80)
ASPEN GLASS PANEL and GARMIN G600 and G500 GLASS PANELS ARE AVAILABLE FOR THIS AIRCRAFT!!!
Autopilot: STEC 55X Autopilot System with Altitude Hold, Vertical Speed, GPSS,Glideslope Coupling(It will fly the ILS and WASS Approach) and Coupled to HSI and 480W
Features: Complete Logs Since New
No Known Damage History
Wing Tip Strobes
GEM Engine Monitor