1984 Glass Panel Piper Seneca III for sale

Details

• Sold
• Reg Number: N7742G
• 4,292 Hour
• Year Built: 1984
• Fuel Type: Gas

Finding the right airframe is the most exciting, yet hardest part! We do the legwork, so you can sit back and enjoy the results. We don’t go out and buy the first plane we see. We conduct a thorough inspection, to see if it’s worthy of our time and your money. Our pre-buy includes an FAA search of all the records pertaining to the aircraft. We ensure there are no outstanding liens, no major repair 337’s and we track the chain of ownership to ensure the plane has always been based in the United States. Next, we inspect the log books to confirm that they’re original and complete since the day it was built. We then inspect the actual airframe. We look for corrosion. We inspect the skins for any hail damage. Then, the remainder of the airframe is inspected as if were an annual. If any AD’s are outstanding, or anything is found to be un-airworthy or marginal on its wear life, we will fix it or replace it. To ensure the highest quality, we ask that you the buyer have the plane inspected by a third party. If anything is found un-airworthy, or any equipment not working to manufacturer’s specifications– down to the last light bulb– we will fix it. No questions asked, at no charge to you.

*Customer satisfaction is something we take seriously. Our goal is to deliver a quality aircraft and to build a solid relationship with you. We are at your disposal, at any time, to answer your questions. Visit our testimonials page to see our customer endorsements.

Year: 1984
Make: Piper
Model: Glass Panel Seneca III
Registration: N7742G
Total Time: Only 4292 Hours Since New
Engine: ONLY 483 Hours Since Major Overhaul to Factory NEW Limits with Factory NEW Cylinders by Western Skyways, Left Engine.
ONLY 111 Hours Since Major Overhaul to Factory NEW Limits with Factory NEW Cylinders by Powermasters, Right Engine
Prop: Only 455 Hours Since Overhauls (3-Blade Hot)
Annual: Due August 2015
IFR: May 2015

Exterior: We removed all necessary control surfaces, the inspection panels, the wing, elevator and rudder tips. All the exterior plastic or fiberglass was inspected. We replaced anything we could not restore to like new condition. Next, we stripped off the old paint down to the bare aluminum, including the door frames. Then we cleaned, prepped, and primed all surfaces. The final paint coat was applied in a dust-free environment, where we used the Sherwin Williams Jet-Glo process. The control surfaces were re-balanced and installed with new hardware. All other external hardware was replaced with stainless steel. All exterior rubber seals were replaced. New glass was installed and the windows were sealed to prevent leakage.. This new classy paint job is in Matterhorn White with Ming Blue and Las Vegas Gold stripes. We added a beautiful finishing touch with the numbers shaded in Las Vegas Gold. Paint was done 1 year ago and still looks like new!!

Interior: We removed the complete interior and examined it for corrosion. We cleaned and treated any that was found. We inspected all interior plastic, and made any repairs or replaced it with new materials. The window trim was dyed to match the interior of the aircraft. The headliner was cleaned and re-dyed or replaced– whatever it took to make it look like new. The seatbelts were re-webbed and color coordinated to match the interior. We installed a new interior placard kit, and new carpeting throughout. We fashioned new side panels with new hardware to fit and look like they did from the factory. We padded and covered the armrests in a matching material. We performed a mechanical and structural inspection of the seat frames, and repaired them as necessary. Also, we painted the seat frames to match the interior. We re-worked the foam and the seat webbing so they’re conducive to lumbar and thigh support. If you prefer, we can custom-cut the foam to fit your body shape before you take delivery. We covered the seats in a high-grade leather and vinyl combination and used a double-French seam– the same process used in high-end vehicles. We installed new windlace cord on doors, along with all new door seals. We find that makes for a quite cabin. The “in” color for 2014 is a neutral tan which we outfitted in this aircraft. It’s a perfect compliment to the side panels and the cut-pile carpeting in beige. This aircraft features club seating.
Interior was done 1 year ago and still looks like new!!

Avionics: We removed all outdated avionics and excess wiring. Every flight and engine instrument was inspected for cosmetic and mechanical performance. If any instrument lenses were foggy, discolored, or not working properly, they were repaired. The autopilot is tested to perform to manufacturer’s specifications. If it didn’t meet these standards, it was fixed. All light bulbs were inspected and replaced if not working. We installed a new instrument panel.

Garmin GMA 340 Audio Panel with 6 Place Intercom and Music Input
Garmin GNS 530W IFR GPS NAV COM
GARMIN G500 GLASS PANEL
Garmin SL 30 NAV COM
Garmin GTX 330 ES Transponder with Traffic and ADSB Displayed on G500
JPI RDM 760 Engine Monitor Fuel Flow Computer Coupled to 530W
Garmin 795 GPS with GL 39

Autopilot: King KFC 150 with Flight Director, Altitude Hold, Vertical Speed, Auto Trim, Heading Bug,GPSS,WAAS and ILS Coupling(It will fly a coupled approach)

Features:
Complete Logs Since New
No Known Damage History
No Known Corrosion Problems
Known Ice
Factory Oxygen
External Power Plug
Dual Push to Talk Switches
Outside Air Temperature Gauge
Wing Tip Strobes
Avionics Master Switch
Electric Trim
Vertically Adjustable Crew Seats
Heated Pitot
Alternate Static Source

Price: $319,900

Contact us regarding this listing